Remedies System Remedies Earthing System

Earth rod clamp

 

Remedies systems distribute the complete range of Earth Clamps that are spring or screw down type earth connectors for jointing earth rod clamp to earth tape, earth rod to cable (stranded copper conductor), tape to tape and rebar clamps for earthing and lightning protection systems. AN Wallis earth rod clamp ranges include a complete selection to allow the clamping and connecting of earth rods clamp, cables, tapes and systems.

 

Earth rod clamp


 

 COPPER ROD TO CABLE ‘G’ CLAMPS

 

 ‘G’ type earth clamps are used for joining earth rods to different sizes of the stranded copper conductor – clamps are highly resistant to corrosion and mechanically strong offering a long life span. Typically, copper earth rod clamp is used as HV electrodes for standard earthing arrangements on ground-mounted LV MV HV substations – the earth tape functions as a perimeter electrode set up to the outer edges of the foundation in direct contact with the soil and connected to the switchgear earth bars. Remedies earthing system will provide protection to exposed and normally un-energised conductive metalwork within the poste perimeter fence including panels, kiosks, lighting towers and oil tanks. Within substation buildings, metal trench covers are indirekt earthed typically using bare copper earth tape (25mm x 3mm) installed along one edge of the trench top edge. Where copper rod clamp within the site is to be buried under proposed cable routes care should be taken to ensure it is buried deep enough into the ground or protected in cable a pipe to avoid damage during cable installation.

 

COPPER ROD TO EARTH TAPE ‘A’ CLAMPS


 

COPPER ROD TO EARTH


 

‘A’ type of earth clamps are used for joining earth rods to different sizes of copper tape – clamps are highly resistant to corrosion and mechanically strong offering a long life span. Remedies system is the stock and distributes the most extensive range of Copper Earth Tapes – this includes bare copper and covered tapes in a selection of coloured overheating used to provide earthing protection and connect metalwork, switchgear and transformers within LV, MV & HV poste buildings and outdoor compounds. The range of Clamp - A earth rod clamps which we offer is made of top quality copper wire and is used for attaching the ground wire to rods. With the features like high tensile strength, robustness and superior quality these are highly demanded in various grounding applications and electrical connections purposes.

 

COPPER EARTH CABLE CLAMPS

Gunmetal rebar clamps with copper “U” bolts are used to connect re-bar to re-bar or re-bar to stranded cable providing a strong mechanical connection along with excellent resistance to corrosion. The following table enables the specification of the correct rebar clamp for 10-40mm diameter applications – should you require any further assistance with the selection of the correct type of earth clamp for jointing rod to tape, rod to cable or tape to tape please contact us.

COPPER EARTH CABLE CLAMPS

 

Rebar clamps are earth clamps used to connect re-bar to re-bar or re-bar to stranded cable providing a strong mechanical connection with excellent resistance to corrosion. COPPER EARTH CABLE CLAMPS  are manufactured from Gunmetal plates with copper ‘U’ bolt. These Copper Alloy Clamps are highly durable with good performance as compared to others.

 

Contact Remedies System for your earthing requirements and we shall give you the perfect solution for your earthing and lightning needs.

 



 

Contact Us

Remedies Earthing Systems Private Limited (RESPL)

An ISO 9001 : 2015 Certified Company & Established in the year 2004 with its corporate office at Lucknow.

Get In Touch

Address

2nd Floor, Al Fazal Enclave, Opposite Good Luck Apartment, Near Rahman Tower, Khurram Nagar, Ring Road, Lucknow - 226022 (India)