Remedies System Remedies Earthing System

Backfill compound

 

 

Remedies systems distribute the complete range of Earth rod Clamps, Coupler, Backfill compound products that are spring or screw down type earth connectors for jointing earth rod to earth tape, earth rod to cable, tape to tape and Clamps for earthing and lightning protection systems. An Wallis earth clamp ranges include a complete selection to allow the clamping and connecting of earth rods clamps, Coupler, Backfill compound, cables, tapes and systems.

 

 

Earth rod clamp

 

Remedies systems distribute the complete range of Earth rod Clamps that are spring or screw down type earth connectors for jointing earth rod clamp to earth tape, earth rod to cable, tape to tape and Clamps for earthing and lightning protection systems. An Wallis earth rod clamp ranges include a complete selection to allow the clamping and connecting of earth rods clamp, cables, tapes and systems.

 

Earth rod clamp


 

 COPPER ROD TO CABLE ‘G’ CLAMPS

 

 ‘G’ type earth clamps are used for joining earth rods to different sizes of the stranded copper conductor – clamps are highly resistant to corrosion and mechanically strong offering a long life span. Typically, copper earth rod clamp is used as HV electrodes for standard earthing arrangements on ground-mounted LV MV HV substations – the earth tape functions as a perimeter electrode set up to the outer edges of the foundation in direct contact with the soil and connected to the switchgear earth bars. Remedies earthing system will provide protection to exposed and normally un-energised conductive metalwork within the poste perimeter fence including panels, kiosks, lighting towers and oil tanks. Within substation buildings, metal trench covers are indirekt earthed typically using bare copper earth tape (25mm x 3mm) installed along one edge of the trench top edge. Where copper rod clamp within the site is to be buried under proposed cable routes care should be taken to ensure it is buried deep enough into the ground or protected in cable a pipe to avoid damage during cable installation.

 

COPPER ROD TO EARTH TAPE ‘A’ CLAMPS


 

COPPER ROD TO EARTH TAPE ‘A’ CLAMPS


 

‘A’ type of earth clamps are used for joining earth rods to different sizes of copper tape – clamps are highly resistant to corrosion and mechanically strong offering a long life span. Remedies system is the stock and distributes the most extensive range of Copper Earth Tapes – this includes bare copper and covered tapes in a selection of coloured overheating used to provide earthing protection and connect metalwork, switchgear and transformers within LV, MV & HV poste buildings and outdoor compounds. With the highlights like high rigidity, heartiness and prevalent quality these are exceptionally requested in different establishing applications and electrical associations purposes.

 

COPPER EARTH CABLE CLAMPS

 

Gunmetal rebar clamps with copper “U” bolts are used to connect re-bar to re-bar or re-bar to stranded cable providing a strong mechanical connection along with excellent resistance to corrosion. The accompanying table empowers the determination of the right rebar brace for 10-40mm breadth applications – should you require any further help with the choice of the right sort of earth cinch for jointing bar to tape, pole to link or tape to tape please get in touch with us. 

 


 

COPPER EARTH CABLE CLAMPS are made from Gunmetal plates with copper 'U' jolt. These Copper Alloy Clamps are profoundly strong with great execution when contrasted with others.

 

Coupler

 

Find & Compare different Coupler from the leading manufacturers by Remedies systems. Complete coupler catalogues from over 100 manufacturers have been listed in this category. By Remedies systems, You can maintain datasheets, compare products, request quotations and get pricing. Any queries are directed to the company and relevant distributors who get back to you directly.

 

Coupler

 

Key Specifications:

 

Types of Coupler:

 

Directional Coupler: This is a four-port gadget – with an info and yield port, a port for the coupled sign and a port that is ended inside. The force that is going from the contribution to the yield is combined with a coupled line and drops through the coupled yield port, which is disengaged from the principle yield port. Any reflected force from the principle yield is coupled to the port that is ended, bringing about negligible reflections inside the gadget/framework.

 

Dual Directional Coupler: This is a four-port device where two directional couplers are connected in series, in opposing directions or a directional coupler with a single mainline and two secondary lines for coupling. Learn more about Dual Directional Couplers.

 

90° Hybrid Coupler: 90-degree hybrid couplers split the input signal into two equal signals with a 90-degree phase differential.

 

180° Hybrid Coupler: 180 Degree Hybrid couplers split the input signal into two equal signals with a 180-degree phase differential.

 

Frequency (MHz): This is the frequency range over which the device can operate while providing a constant level of coupling with minimal loss and reflection.

 

Coupling (dB): This is the ratio of incident power fed to the main port to the power at the output of the coupled port.

 

Coupling Variation (dB): The maximum peak-to-peak variation in coupling expected over the specified frequency range.

 

Insertion Loss (dB): The reduction in output power due to the power transferred to the coupled line.

 

Directivity (dB): The difference between the power level of the coupled and isolated ports. The directivity is a measure of the independence of the coupled and isolated ports.

 

Average Power (W): The level of power that the device can handle while maintaining its electrical characteristics.

 

Impedance coupler (Ohms): The impedance of a coupler must match the circuit/system it is connected to; this will minimize any reflection within the circuit/system. Usually, the impedance is 50 Ohms or 75 Ohms.

 

Backfill compound

 

Remedies system are engaged in offering a wide range of BackFilling Compound, Back Filling Earthing Compound to our clients. BackFilling Compound directly helps to improve the conductivity of the earth electrode and ground electrode. What we offer to our clients are manufactured using high-grade raw material using high technology equipment’s & machines. Our experts manufacture these products keeping in mind the needs and requirements of our clients as per the set international standards. BackFilling Compound is in the category of the Earth Resistance Enhancement Compound. These products are usually huge demand across the world.

 

Backfill compound

 

Features:

 

1.Accurate composition

2.Easy to use

3.Free from impurities

4.BackFill Enhancement Compound is tested from NABL Accredited lab.

5. These products help to increase the conductivity of the Earth Electrode.

6.No need for maintenance.

7.Long Life

8.Automatically rechargeable Features.

9.No Need to pouring water from time to time

10.Free from impurities













 

Contact Us

Remedies Earthing Systems Private Limited (RESPL)

An ISO 9001 : 2015 Certified Company & Established in the year 2004 with its corporate office at Lucknow.

Get In Touch

Address

2nd Floor, Al Fazal Enclave, Opposite Good Luck Apartment, Near Rahman Tower, Khurram Nagar, Ring Road, Lucknow - 226022 (India)